Submersible electromagnetic vibrating pump
Submersible electromagnetic vibrating pump was recalled on 6 November 2009 under EU Safety Gate alert 1407/09. Electric shock risk reported by Slovakia. The product poses a risk of electric shock because:- the power input and the current exceeds the maximum permitted value,- the leakage current is higher than permitted ,- the cross-section of the wires in the supply cord is too small,- the wires are not sufficiently secured against accidental loosening,- resistance between protective parts is not sufficiently low.
| Alert Number | 1407/09 |
| Brand | Marina |
| Category | Electrical appliances and equipment |
| Risk Type | Electric shock |
| Notifying Country | Slovakia |
| Country of Origin | Italy |
| Model Number | SKM 1000 |
| Published | 6 November 2009 |
Risk Description
The product poses a risk of electric shock because:- the power input and the current exceeds the maximum permitted value,- the leakage current is higher than permitted ,- the cross-section of the wires in the supply cord is too small,- the wires are not sufficiently secured against accidental loosening,- resistance between protective parts is not sufficiently low.The product does not comply with the Low Voltage Directive (LVD) and the relevant European standard EN 60335.
Measures Taken
Type of economic operator to whom the measure(s) were ordered: OtherCategory of measure(s): Sales ban and withdrawal from the market ordered by the authorities. Date of entry into force: UnknownType of economic operator taking notified measure(s): OtherCategory of measure(s): Voluntary stop of sales by the distributor.Date of entry into force: Unknown
Product Description
Submersible electromagnetic vibrating hydrostatic pump intended for permanent underwater operation. It is made from alloy of aluminium with a flexible membrane. Marking on the product - marina ®, Q 1080 l/h, IP 68, H max. 70 m, P 280 W, 230 V ~ 50 Hz, n 2800 min-1.
⚡ What Should You Do?
This recall involves a electric shock hazard related to Submersible electromagnetic vibrating pump.
About this risk
This product has inadequate electrical insulation, faulty wiring, or other electrical defects that can cause electric shock during use.
Recommended action
Unplug the product immediately and do not use it. Do not attempt to repair it yourself. Contact the manufacturer or retailer for a recall remedy.
Who is at risk?
Anyone using the product, especially in wet environments such as bathrooms or kitchens.