Mitre saw with bench
Mitre saw with bench was recalled on 18 January 2008 under EU Safety Gate alert 0030/08. Injuries risk reported by Spain. The product poses a serious risk of injuries because: - the plastics of the guards are defective,- the guards are fragile,- in mitre mode the fixed upper guard allows the test finger to come into contact with the teeth of the cutting disc,- the fastening anchorage of the lower protector in mitre mode is too fragile, it breaks without any effort in attempting to fit it, and cannot therefore be used,- the rear guard of the cutting disc in the mitre position is plastic with manufacturing defects which make it very fragile, it breaks when the disc is fitted, leaving a great number of cutting disc teeth (approximately 5 cm) exposed (para.
| Alert Number | 0030/08 |
| Brand | Mader excel |
| Category | Machinery |
| Risk Type | Injuries |
| Notifying Country | Spain |
| Country of Origin | Unknown |
| Model Number | Model MEX-92501 (1560W-250MM) |
| Published | 18 January 2008 |
Risk Description
The product poses a serious risk of injuries because: - the plastics of the guards are defective,- the guards are fragile,- in mitre mode the fixed upper guard allows the test finger to come into contact with the teeth of the cutting disc,- the fastening anchorage of the lower protector in mitre mode is too fragile, it breaks without any effort in attempting to fit it, and cannot therefore be used,- the rear guard of the cutting disc in the mitre position is plastic with manufacturing defects which make it very fragile, it breaks when the disc is fitted, leaving a great number of cutting disc teeth (approximately 5 cm) exposed (para.s 1.4.1/2/3),- the cutting disc can be fitted in a very eccentric position in its housing because it does not have clamp flanges, an effective guide for the disc or if the spindle is too small for the disc supplied. When the disc is off-centre it causes strong vibrations when starting up and stopping. It also causes resonance at maximum power which causes a loud, piercing noise and could cause the flanges to loosen, leaving the cutting disc loose.The product does not comply with Machinery Directive and the relevant European standard EN 12100.
Measures Taken
Type of economic operator to whom the measure(s) were ordered: OtherCategory of measure(s): Sales ban and withdrawal from the market ordered by the authorities.Date of entry into force: Unknown
Product Description
Bench-mounted mitre saw. The packaging is a cardboard box with the statements: "Mitre wood saw, 1560W-250MM with support bench. Mader Excel Mex-92501. CE. This portable workbench with an electric saw is semi-professional and safe. Makes for more sturdier, more robust work. Ideal for cutting solid wood, with a guide that can be adjusted to 45º it can cut at 45º and 90º. Date of Manufacture 050930. Lot No IF050930. Produced by R.O.C and details of the Portuguese importer.
⚠️ What Should You Do?
This recall involves a injuries hazard related to Mitre saw with bench.
About this risk
This product has a design or manufacturing defect that can cause physical injuries such as cuts, bruises, fractures, or other bodily harm during normal use.
Recommended action
Stop using the product immediately. Check yourself and family members for any injuries. Store the product safely out of reach and contact the retailer or manufacturer for a replacement or refund.
Who is at risk?
All users, particularly children and elderly people who may be more vulnerable to injury.